Mechanical Mods are tubes with a threaded top that are connected to the ego battery. They typically come in brass or copper and feature a female-threaded top. The positive terminal of the battery contacts the underside of the 510 connector, forming an electrical connection. This type of device is called a mechanical mod. You need to understand the Ohm’s Law in order to understand the operation of a mechanical mech mod.
The first and most common method of cleaning mechanical mods is with a toothbrush and eraser. This method involves brushing the device with a soft microfiber. However, some perfectionists prefer to use a Dremel device to clean the pin. This process requires more time and effort, but it results in a sparkling device. Whether you choose to use an unregulated or regulated mechanical mod, the most important factor is proper research.
It is important to know how to set the resistance of your mechanical mod. While most experienced users prefer to use a higher resistance, there are certain conditions that should be met before you can safely use one. For instance, if you use a dual-coil build, you need to make sure that the lead lengths of each coil are the same length. You should not over-tighten the battery because it will impair its functioning.